SV David 210913

Meeting notes
Written By Zo Damage

Meeting was very productive.

We discussed presentation of works and the mural walls. I have had a number of sections printed to scale on paper to test on the walls. It is important to celebrate and work with the installation space. As such, I am keen to have the display walls covered. Each wall is 6x2.4 metres. The required coverage is approximately 6 x 3 meter drops, totalling to 32 linear meters.

Ideas

  • Phototex: $90 per linear meter — too expensive.

  • Draped printed muslin: $20 per linear meter — maybe.

  • Draped printed georgette: $30 per linear meter — too expensive.

  • Tiled 80gsm printouts: Poor quality.

  • Wall paper: Expensive. Glues to surface. Not suitable.

  • Printing on tiled substrate (ie") MDF: Need to build fake wall. Time is an issue. Once the section is complete cost will equal that of the wall paper.

  • Too time consuming. Difficult to install. Not cost effective.

25% strength

  • Tests with 25% strength print on paper is very good working with the space but not overpowering the main installation of the disks.

  • Background/mural serves as representational figuration of memory, thought, distance, separation. All of which are directly related to topic.

100% strength

  • Tests with 100% strength print on paper was not successful. The wall became central and a primary point of focus, overpowering the main works.

  • No.

Keywords

Semester 4, Studio 4, Installation, SV, Meeting, Overture

Zo Damage
Previous

TCCP 210914
Next

PCP A1 feedback